Unclogging your kitchen sink is a dreaded task, but there are some brilliant tips to save money on professional plumbers. There are methods such as using a snake, hydro jetting, and open pipe cleaning. Here are some of them. You may want to try one of these first. If you’re unsure how to proceed, follow these simple guidelines to solve your plumbing problem. Then, you can hire a plumber in Canada for the more complicated jobs.
Use boil water
The easiest tip for unclogging the kitchen sink is boiling water. You can use your stove or microwave to boil water and then carefully pour a few inches of it down the drain. You can also use a plunger to pull debris up the drain, but be careful not to push too hard! The hot water can cause the clog to move even deeper into the drain, so be patient and repeat the process until you’re certain it’s gone.
Use a mixture of baking soda and vinegar
A baking soda and vinegar mixture is another effective way to unclog the kitchen sink. The baking soda and vinegar mixture creates a slow-draining volcano effect. If you’ve been using coconut oil, you may have accidentally spilled some of this substance in the sink. If you think it’s a simple solution, consider following this recipe. While this method is very effective, plumbers recommend you avoid using chemical-based store-bought products.
Use soldering pipes
Using solder to connect piping systems is an old-school method that’s not the most effective. The problem with solder is that it sometimes fails to melt completely or overheat, resulting in cracks and leaks. To avoid this issue, learn to solder pipes correctly by following these genius tips for plumbing. These tips will save you from costly mistakes and give you the confidence to tackle any plumbing project.
Sandpapering pipes
This is a very simple yet effective way to clean your pipes. You will need a pair of sandpaper and a chemical cleaner to do so. The cleaner will not work in place of primer, which will start the chemical reaction between the fitting and pipe. When repairing CPVC or PVC pipes, it is best to use a primer and glue. When using ABS or silicone, you should dry-fit the pipe and use a rag to wipe up any excess glue.